Mach III

THE BEST BASKET FOR HIGH USE DISC GOLF COURSES & CHAMPIONSHIP TOURNAMENT PLAY

---

BASKET NAVIGATION MENU:
Baskets Main Page | Permanent Baskets Page
Mach III™ Baskets | Mach V™ Baskets | Mach II™ Baskets

---

Mach III Price:

• » Direct Cement - "No Frills" (59 lbs.):
  $385.00 ea.
• » Anchor & Collar - "Deluxe" (65 lbs.):
  $420.00 ea.
• » Portable Base - "Portable" (67 lbs.):
  $420.00 ea.
• » Contact for Course Quote.

---

Mach III Features:

• » 24 welded and hot dipped galvanized strands of chain,
• » 2 successive rows of chain, 1 outer, 1 inner,
• » stainless steel “S” hooks,
• » the top choice of touring professionals,
• » the highest quality basket manufacturing,
• » hand inspected hot dipped galvanized construction,
• » PDGA approved for championship level tournamnet play,
• » 20 year warranty,
• » Full specs below.

---

Mach III Description:

If you are planning a course for professional tournament play, or if you just want the best, the Mach III is the top choice of touring professionals.

Most easily identified by the prominent number plate, the Mach III, is considered the Cadillac® of disc catching equipment for the sport of disc golf. Constructed with 2 rows of chain for a total of 24 chains, the Mach III is by far the top disc catching device available in the industry and is the most widely used catching device found on PDGA approved courses.

The Mach III is designed with a one inner and one outer chain pattern with a 24 chain strand configuration. Our Trapper Basket comes standard on all of our Disc Pole Holes. The Trapper design prevents discs from rolling up and out of the basket. Once a discs hits the basket it stays there.

Mounting Options:

Mach Baskets have three mounting options:
1) Portable model with metal base and wheel (Portable),
2) permanent and removable model with anchor and lockable collar (Deluxe) and,
3) direct cement pole option (No Frills).

Direct Hit Flags

Direct Hit Disc Golf Flags add visibility to your pin placements as well as offering the player wind speed and direction information.

POLE (70 in.) - 1 1/2 in. I.D., 1 15/16 in. O.D. hot-dipped galvanized pipe, drilled.

POLES - The holes closest to one end of the pole are for the Chain Assembly. This end should also have a red Pole Cap Plug. The middle set of holes are for the Basket Assembly. The bottom set of holes are for the Locking Collar for Deluxe Disc Pole Hole.

CHAIN ASSEMBLY - Welded and hot dipped galvanized.
Number Plate - 10 gauge steel, 8 in. diameter. Decal - vinyl numbers and identification cover. Sleeve (6 in.) - 115/16 in. O.D. pipe, drilled. Bolt, hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws). Rod Assembly - 3/8 in. steel rod.
Chain - 12 outer/12 inner chains, 500 lb. test, all hooked to Chain Assembly with heavy duty "S" Hooks to allow freer movement of Chains.

CHAIN ASSEMBLY INSTRUCTIONS - Slide Chain Assembly, (ring first), down pole. Align holes in collar with holes at top of pole. Fasten with bolt, hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws).

TRAPPER BASKET ASSEMBLY - 3/8 inch steel rod, welded and hot-dipped galvanized. 6" Sleeve - bolt, hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws).

TRAPPER BASKET ASSEMBLY INSTRUCTIONS - Slide Basket Assembly down pole, (basket facing up), until holes in collar align with holes in middle of pole. Fasten with bolt, hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws).

*DELUXE DISC POLE HOLE ONLY

LOCKING COLLAR - Welded and hot-dipped galvanized. 4" Collar- 2 1/8" Tubing. Bolt, hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws).

LOCKING COLLAR ASSEMBLY INSTRUCTIONS - Slide the locking collar, with the locking tab at the bottom of collar, up pole to bottom set of holes. Align holes in locking collar with holes in pole and fasten with bolt,hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws). After the locking collar is fastened, the pole can be placed in anchor to complete installation.

*Note: The LOCKING TAB should always be pointing at the tee.

ANCHOR -18 in. x  2 1/8 in. O.D. pipe, drilled. Install flush to ground with matching Locking Tab aiming at the tee.

CONCRETE & RIVER ROCK (Used to stabilize Anchor until cement sets) - Approximately 1 cubic foot (concrete, river rock and lock not furnished).

CAUTION: Let concrete settle 1 week before installing hardware.